Fish Lover

I. External application on livestock: Dissolve the agent in clean water 800 times and then spray directly on the external application of livestock, or use the medicated bath method or around the livestock shed.

II. Use outside fish:

(1) Use a dosage of 0.2~0.5PPM once a week for four consecutive weeks.

(2) Before applying pesticides, reduce the amount of water in the pool as much as possible to save the amount of pesticides used.

(3) Apply the pesticide in the early morning or evening as much as possible and avoid using it when the water temperature is too high.

(4) Determine the dosage, add 100 times the amount of water, stir and dissolve, then spread evenly in the fish pond. Make sure to spread evenly. Measure the area and water depth of the fish pond, and calculate the dosage according to the table below.

(5) The following table is based on a salt content of 3.5% (35 parts per thousand). The dosage should be increased when the salt content is low. The dosage should also be increased when there are too many plankton in the water or when there are many fish lice infestations.

(6) Do not use this drug on shrimp, crabs, or clams. Do not use this drug on fry under three inches in length. Fry over three inches in length should be released five days after application.

(7) This agent has low toxicity, but to avoid accidents, you should take a shower immediately after applying the agent and change into work clothes. If you are accidentally poisoned, you can take "Adolphine" to detoxify.

(8) Avoid adding water within two days after spraying to maintain the concentration of the medicine. After three days, you can add water at any time.

(9) The dosage in the table below is 0.3 parts per million (ppm). The dosage in grams is for reference only.